Unfortunately, since Gothic 3 there hasn’t been a game by Piranha Bytes that offers really high settings for higher quality hardware.
This guide will show how to increase graphics beyond the maximum settings.
Graphically, Elex 2 has only slightly increased compared to its predecessor.
Here I don’t mean the art design or the quality of the individual objects/characters in the game, which have made some progress.
But the general technical presentation has hardly improved noticeably.
However, players who played the predecessor with the identical system will nonetheless find that the performance has roughly halved in some areas. AMD users are currently at an additional disadvantage, as the GPUs seem to be artificially slowed down by a mixture of driver deficits and poor programming/optimization on the part of PB.
Unfortunately, this is the state of affairs and shows that the developers more and more lagging behind the competition with their own technology, which can conjure up optically more sophisticated worlds with less power requirements.
Since the low frame rates in high-end GPUs, especially AMDs, are often due to insufficient load, the graphics quality with such GPUs can be increased through these adjustments without an aditional major loss in performance in the limiting areas.
The changes take place in the “ConfigDefault.xml” file. It is located in the game folder
“…\Steam\steamapps\common\ELEX2\data\ini”. First you should take a security copy of the file. Now open the original file with a text editor like “Notepad++”.
source of error: Don’t take the “ConfigDefaultNew.xml” file. It is better structured but it will be overridden every start of the game by the “ConfigDefault.xml” file.
Since this is about expanding the graphics beyond the maximum settings in the menu, it is assumed that the highest settings are selected in the game’s options menu.
First, the shadows are improved.
The resolution as well as the visibility of the shadows is greatly increased. Near and far as well.
The flat lit distant hills should now look much better and more detailed as the buildings and vegetation farther away will now cast shadows as well.
The cascade levels and their distribution will be adjusted according to the resolution and view range. The transition from the most detailed to the next lower cascade should now be less obvious.
To do this, some values are adjusted under the entry “<Shadows” and there under the sub-item “<Ultra”. (Found from line 140.)
After that it should look like this (underlined = has been changed):
<Ultra TerrainShadowMapSize="1024" TerrainShadowMapCount="4" TerrainShadowMapMaxDistance="800000.0" EnableShadows="true" DetailShadowMapSize="6144" DetailShadowMapCount="4" DetailShadowMapViewRange="40000.0" DetailShadowMapSplitFactor="0.04" DetailShadowMapNearSplitFactorOverwrite="300.0f" DetailShadowMapFilterQuality="2" DetailShadowMapFixedFoV="60" CachedShadowMapWidth="16384" CachedShadowMapHeight="8192" CachedShadowMapNodeWidth="8" CachedShadowMapNodeHeight="4" CachedShadowMapLevelDistanceRatio="1.0f" CachedShadowMapLevelSizeRatio="1000.0f" CachedShadowMapLevelCount="5" CachedShadowMapQuality="2" SSAOQuality="3" SmallObjectThreshold="0.005" SmallObjectFadeRange="0.005" ShadowDepthBias="4.0" />
Unfortunately, the terrain shadows don’t seem to work in general at the moment, which is why I haven’t changed anything about them. They are probably calculated in the background, the memory consumption increases when the resolution is increased, but they are not displayed. With Elex 1 they were still there.
Most players won’t notice a difference, since most of the mountains are formed by rock objects anyway and therefore also cast shadows. It’s a shame, though, and it’s questionable whether this is intentional.
Increase grass visibility
The “ViewRange” is increased to 16000 under the item “<Vegetation” and there the sub-item “<High”. (Line 536) It should look like this:
<High ViewRange="16000.0" Enabled="True" Density="1.0" />
The default value is 9600. At 32000, the view range is even greater. However, the grass is then loaded in large blocks at once, which looks very bad.
I recommend a value between 9600 and 16000.
With a lower value, the loading transitions are smoother and the view range is shorter.
With a higher value, the view range is longer, but the grass loading is more abrupt.
Increase the “LoDFactor” under “<SceneQuality”. (Line 543) Default is 1.0.
I recommend 5.0 as a good compromise.
<SceneQuality ViewRangeQuality="Medium" LoDFactor="5.0" >
There are still some promising looking entries in the INI. E.g. under “Scene” or “Vegetation”.
However, most of them simply don’t work, have a hard limit or even do the opposite of what you expect. Increasing the value for “SpeedTree” can even cause some trees to disappear completely instead of showing several or improving their LOD.
Since I’m still hoping for patches that at least get the AMD problem under control, I’m not uploading a finished file either. This would probably be overwritten again during patching or its structure would be changed.
That’s why there are only instructions here on how to set up everything yourself.
What you can’t see in the pictures is that the popping up of the various LOD levels in the immediate vicinity has become significantly less and the picture doesn’t look so restless anymore.
Only for graphics fanatics like me. And yes, I actually play the games and enjoy them.
VRAM and RAM usage increases significantly, really only for fast computers.
The developer is missing a solution for shadows fare away like ScreenSpaceShadows or full screen AO or similar things. Maybe the terrain shadows should be activated again in the engine. bug?
Unfortunately, I have to continue exploring the forbidden west first…
This is all for ELEX II Shadow Settings + Quality + Increase LOD (ini) hope you enjoy the post. If you believe we forget or we should update the post please let us know via comment, we will try our best to fix how fast is possible! Have a great day!
- Check All ELEX II Posts List
Leave a Reply