Getting Started
First you’ll need following Materials:
- 196 Building Blocks
- 393 Seetrough Blocks
- Level 1 and Level 2 Engine
- 1 Saw
- 8 Bearings
- 1 Controller
- 2 Switches
- 1 Saddle-Seat
- 1 Piston
- 6 Wheels
- 1 Sunshake Vendingmachine
Buiding
Now we’ll start Build a fundament as shown.
Next we’ll add 2 front wheels and 1 saw as shown.
Now we’ll add is the cage for the logs.The Cage is 16 Blocks high and the sides are filled up “Cage Blocks”. We’ll skip one beam on the left.
Then we’ll place a door on the bearing on the bottom. Door = Red makreted
Now we’ll place a Controller onto the cage and connet the Controller to Bearing who is connected with the door. Set the angle to 90°
The next thing will do is to connect the “Sawing-Mechanism”. We’ll connect one Switch to the seat, Engine and Piston. Set the Piston-Length to 7.
Now we’ll connect the “Door-Controller” to the 2nd Switch and the Switch to the Seat.
Then we’ll do is to connect all Wheels to the unused Engine and the Engine to the Seat.
The next Thing we’ll do is to place the Sunshake-Vending-Machine on the Back.
End Result
It should lookm like this:
Now I’ll show you how to you it:
1. Drive to a Tree
2. Press 2 to open the door
3. Embrace the Tree with the cage
4. Close the door
5. Press 1 So activate the saw
6. Have Fun
Here we come to an end for Scrap Mechanic How to build an easy Wood-Harvester hope you enjoy it. If you think we forget something to include or we should make an update to the post let us know via comment, and we will fix it asap! Thanks and have a great day!
- Check All Scrap Mechanic Posts List
Leave a Reply